Description
Some ideas using “Blue Curacao”:
Stud earrings:
Brief instruction:
Cut two pieces of glass (here Effetre T006 clear) with the same size from the rod. I use a 5 mm diameter rod and cut off 5-6 mm pieces. Hold the glass piece with tweezers or pliers and warm it in the flame.
Also, warm the tip of the ear stud (which you hold with an ear stud-holding-tool) and dock it onto the warm glass. Then melt the glass until it is a small round blob. The stud should go 1-2 mm into the glass.
Now roll the hot glass blob into the frit blend and melt them in. Then shape it – eg with a lentil former or a really small marble mold, anneal it and put it into the annealing kiln or into annealing beads/bubbles.
Brief instruction:
Cut two pieces of glass (here Effetre T006 clear) with the same size from the rod. I use a 5 mm diameter rod and cut off 5-6 mm pieces. Hold the glass piece with tweezers or pliers and warm it in the flame.
Also, warm the tip of the ear stud (which you hold with an ear stud-holding-tool) and dock it onto the warm glass. Then melt the glass until it is a small round blob. The stud should go 1-2 mm into the glass.
Now roll the hot glass blob into the frit blend and melt them in.
Grab the hot glass at the tip with your tweezers and twist it. Melt it again until it is round and next shape it eg with a lentil former or a really small marble mold, anneal it and put it into the annealing kiln or into annealing beads/bubbles.
